SHOE GOO® - ASSORTED SIZES
Product Code: 61600
Shoe Goo is a multi purpose product. Its primary function is to rebuild worn down heels of shoes. Athletic footwear often wears away in areas where there is heavy friction with the ground. This frequently occurs on skateboard and tennis shoes. Not only is it a filler, it also acts as a waterproof sealer and protector preventing premature damage. It can be placed on soles as a non-slip surface, and can keep shoelace ends from fraying.
MADE IN USA.
MADE IN USA.
DIRECTIONS – Read directions and test small area before use.
- Surface should be clean, dry and free of dirt.
- Puncture seal in neck of tube using pointer cap. Ideal application temperature range is 50 to 90 ºF (10 to 32 ºC). However, fully cured adhesive can withstand temperatures from -40 to 180 ºF (-40 to 82 ºC) intermittently.
- Apply directly to surfaces to be protected, bonded or repaired. For waterproofing and protecting, use thin coats (spread with a disposable tool) to build a thick coating, allowing each layer to set 3-4 hours.
- Allow repair to cure for 24 hours. Depending on materials and temperature, maximum strength may not be reached for 48 to 72 hours.
- For future easy cap removal, apply a thin coat of petroleum jelly to the threads of the tube before replacing the cap.
- Clean uncured adhesive with acetone or citrus-based solvents. Cured material may be removed by cutting or scraping.