BRILLO™ SHOE COLOR SPRAY 127g / 4.5oz - ASSORTED COLOURS
Product Code: 29603
Brillo™ colour sprays are formulated to renew or change the colour of footwear and accessories. Increased flexibility and pigment for fuller, smooth coverage and natural shine. Also helps to repel water, soil and stains. For use on leather, vinyl and plastic.
MADE IN USA.
*NOTE: COLOURS MAY VARY SLIGHTLY FROM PICTURES SHOWN.
127g Small size is available in 60 stock colours.
340g Large size is available in 4 colours: VIEW HERE
1. READ ALL CAUTIONARY TEXT BELOW BEFORE USE.
2. Test first on small inconspicuous area for color fastness.
3. Prepare surface and make sure it's free of dirt and oils.
4. Stuff shoe with paper to avoid coloring inside of the shoe and protect surrounding areas from over spraying.
5. Use can at room temperature and shake very well before using.
6. Hold can 15-20 cm away. Spray one very light coat, allow to dry, then repeat. Let dry completely before wearing.
7. Do not use on suede.
View additional application and trouleshooting tips here.
NOTICE: Reports have associated repeated and prolonged occupational overexposure to solvents with permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents may be harmful or fatal. Do not puncture or incinerate (burn) container. Exposure to heat or prolonged exposure to sun may cause bursting. Do not expose to heat or store at temperatures above 120° F.
Vapors may ignite explosively. Keep away from heat, sparks and flame. VAPORS MAY CAUSE FLASH FIRE. Do not smoke. Extinguish all flames and pilot lights, and turn off stoves, heaters, electric motors and other sources of ignition during use and until all vapors are gone. Prevent build-up of vapors by opening all windows and doors to achieve cross-ventilation. Use only with adequate ventilation. Do not breathe dust, vapors or spray mist. If you experience eye watering, headache or dizziness or if air monitoring demonstrates vapor/mist levels are above applicable limits, wear an appropriate, properly fitted respirator (NIOSH approved) during and after application. Avoid contact with eyes, skin and clothing. Wash thoroughly after handling.
FIRST AID: In case of eye contact, flush immediately with plenty of water for at least 15 minutes and get medical attention immediately; for skin, wash thoroughly with soap and water. If swallowed, get medical attention immediately. If you experience difficulty in breathing, leave the area to obtain fresh air. If continued difficulty is experienced, get medical assistance immediately. If spilled, contain spilled material and remove with inert absorbent. Dispose of contaminated absorbent, container and unused contents in accordance with local, state and federal regulations.
KEEP OUT OF REACH OF CHILDREN